Create the future with lower yellowing, renewable resins and raw materials
1 2 3 4 5 Next Page 1 of 29
Product

VeoVa™ 10 Monomer

" VeoVa 10 Monomer is the vinyl ester of Versatic Acid 10. VeoVa 10 Monomer is widely used as a modifying co-monomer in the manufacture of vinyl acetate based polymer latices. VeoVa 10 is also used for the production of VeoVa 10/(meth)acrylic latices and solution polymers." Disclaimer: ® and &tr...

Product

EPI-REZ Resin 5003-W-55

Waterborne dispersion of an epoxidized Bisphenol A novolac resin with an average functionality of 3 (EPON SU-3 type). Disclaimer: ® and ™ Licensed trademarks of Hexion Inc. The information provided herein was believed by Hexion Inc. ( Hexion ) to be accurate at the time of preparation or p...

Product

EPON Resin 826

" Unmodified Liquid Resin - A low viscosity resin. Possesses performance properties similar to EPON Resin 828. Capable of accepting higher filler levels. Subject to crystallization when cold." Disclaimer: ® and ™ Licensed trademarks of Hexion Inc. The information provided herein was believ...

Recipe

SF 4020 One-Package Cure Adhesive 828

" EPON™ Resin 828 Introduction This accelerated one-package Epoxy/DICY adhesive, properly formulated, can yield over three months pot life when stored at normal room temperature, yet develops good bond strengths on relatively short cure schedules of 30 minutes at 149 °C or 40 minutes at 13...

Recipe

SF 4014 Epoxy Adhesive 828 61 3125

" EPON™ Resin 828 / HELOXY™ Modifier 61 / EPIKURE™ Curing Agent 3125 Introduction This solventless epoxy adhesive develops high peel strength to many difficult-to-bond substrates such as polyethylene, thermoplastic rubber and polyester films like Mylar and Celanar. Effective cure t...

Recipe

SF 6017 Waterborne Self-Leveling 8535-W-60 3510-W-60

" Waterborne Self-Leveling Flooring Formulation EPI-REZ™ Resin 3510-W-60 / EPIKURE™ Curing Agent 8535-W-50 Features 100% waterborne - No cosolvents Fast hardness development Early water-resistance Recommended for use on concrete as a self leveling flooring formulation Formula Material Su...

Product

Durite Resin AD-5614

Disclaimer: ® and ™ Licensed trademarks of Hexion Inc. The information provided herein was believed by Hexion Inc. ( Hexion ) to be accurate at the time of preparation or prepared from sources believed to be reliable, but it is the responsibility of the user to investigate and understand o...

Product

EPIKURE Curing Agent P-100

"Application Methods: Typical methods include electrostatic spray, fluidized bed, electrostatic fluidized bed and flocking by gun. These systems require the incorporation of a bake cycle to cure the formulations. " "General Information:Blending by Extrusion: EPIKURE Curing Agent P-100 is a low melti...

Product

EPI-REZ Resin 3510-W-60 Europe

" EPI-REZ Resin 3510-W-60 is a moderate viscosity, non-ionic, aqueous dispersion of a bisphenol A epoxy resin similar to EPIKOTE Resin 828." Disclaimer: ® and ™ Licensed trademarks of Hexion Inc. The information provided herein was believed by Hexion Inc. ( Hexion ) to be accurate at the t...

Product

EPI-REZ Resin WD-510

Water dispersible bisphenol A epoxy resin. Disclaimer: ® and ™ Licensed trademarks of Hexion Inc. The information provided herein was believed by Hexion Inc. ( Hexion ) to be accurate at the time of preparation or prepared from sources believed to be reliable, but it is the responsibility ...

Product

Bakelite UP 3620

Polyester moulding compound, mainly organically filled, styrene free, processing shrinkage as for phenolic moulding compounds, nonflammable, high surface quality, UL listed Applications – Lamp housings, neon tubes end parts and bases, switch gears, watt hour meters housings and base plates App...

Product

HELOXY Modifier 48

Polyfunctional Glycidyl Ether - Trifunctionality increases crosslink density. Maintains or increases reactivity. Relatively efficient viscosity reducer. Disclaimer: ® and ™ Licensed trademarks of Hexion Inc. The information provided herein was believed by Hexion Inc. ( Hexion ) to be accur...

Recipe

SF 1728 Waterborne Gray Midcoat 6520 6870 (less than 100 g/L VOC)

" Waterborne Gray Midcoat – 3:1 Ratio EPI-REZ™ Resin 6520-WH-53 / EPIKURE™ Curing Agent 6870-W-53 Introduction This formulation is designed as a mid-coat between an epoxy based primer and an acrylic topcoat. It is a rapid drying, low VOC coating with a convenient combining ratio (3...

Product

EPON Resin 828

Disclaimer: ® and ™ Licensed trademarks of Hexion Inc. The information provided herein was believed by Hexion Inc. ( Hexion ) to be accurate at the time of preparation or prepared from sources believed to be reliable, but it is the responsibility of the user to investigate and understand o...

Product

EPIKOTE Resin 862

" Low viscosity bisphenol F resin. High performance alternative for EPIKOTE 828 blends." Disclaimer: ® and ™ Licensed trademarks of Hexion Inc. The information provided herein was believed by Hexion Inc. ( Hexion ) to be accurate at the time of preparation or prepared from sources believed...

Recipe

SF 1703 Waterborne Clear Coating 6520 6870

" Waterborne Clear Epoxy Coating EPI-REZ™ Resin 6520-WH-53 / EPIKURE™ Curing Agent 6870-W-53 Suggested Uses Mar and slip resistant wood floor coating Concrete floor sealer Features High degree of mar and slip resistance Non-HAP1 formula VOC2 level of 1.70 lb/gal (204 g/l) No induction pe...

Recipe

SF 4025 One-Package Adhesive 828 Dicyandimide

" EPON™ Resin 828 / Dicyandiamide Introduction This is general purpose, filled one-package epoxy adhesive especially suited for metal – metal bonding which will yield a shelf life of at least 6 months at 25°C (77°F). Suggested Uses Cost sensitive applications where a one-componen...

Recipe

SF 4019 One Package Adhesive 828and58006

" EPON™ Resin 828 and 58006 Introduction This one-package epoxy adhesive, when properly formulated, can yield a shelf life of approximately 6 months at 25°C (77°F) and cures rapidly at temperatures above 116°C (240°F). High bond strengths are maintained at temperatures over the...

Product

EPIKURE Curing Agent 3115-X-70A

High viscosity and long pot life polyamide solution (solvent: xylene). Designed to provide toughness, flexibility, and water resistance with a non-critical ratio. Disclaimer: ® and ™ Licensed trademarks of Hexion Inc. The information provided herein was believed by Hexion Inc. ( Hexion ) t...

Product

EPON Resin 815C

" Modified Liquid Resins and Blends - Very low viscosity resin with crystallization resistance. Good chemical resistance." Disclaimer: ® and ™ Licensed trademarks of Hexion Inc. The information provided herein was believed by Hexion Inc. ( Hexion ) to be accurate at the time of preparation...

Product

EPON Resin 8111

" Acrylate Resin - Possesses exceptionally rapid reaction rates. Uses include various high build sealers, wear resistant surfacing and low temperature applications." Disclaimer: ® and ™ Licensed trademarks of Hexion Inc. The information provided herein was believed by Hexion Inc. ( Hexion ...

Recipe

SF 1806 Red Oxide Primer 3520 8536

" Red Iron Oxide Primer EPI-REZ™ Resin 3520-WY-55 / EPIKURE™ Curing Agent 8536-MY-60 Formula Material Supplier Pounds Gallons Part A 2-Propoxyethanol 11.6 1.50 Lutensol OP-10 BASF Chemical Co. 3.5 0.39 Tamol 731 Surfactant Rohm & Haas Co. 3.5 0.38 Q148 Defoamer Troy Chemical Co. 4.0 ...

Product

EPI-REZ Resin 3520-WY-55

Waterborne dispersion of a semi-solid Bisphenol A epoxy resin (EPON 1001-type) with an organic co-solvent. Disclaimer: ® and ™ Licensed trademarks of Hexion Inc. The information provided herein was believed by Hexion Inc. ( Hexion ) to be accurate at the time of preparation or prepared fro...

Product

EPON Resin 1001-X-75

" For Ambient Cure Applications - Epoxy resin solution, 75% solids in xylene." Disclaimer: ® and ™ Licensed trademarks of Hexion Inc. The information provided herein was believed by Hexion Inc. ( Hexion ) to be accurate at the time of preparation or prepared from sources believed to be rel...

1 2 3 4 5 Next Page 1 of 29